OSD and Source button
When the TVA is turned on, the OSD will display “PC2TV”.
When the TVA is connected to PCA, the TV will display PC screen.
When the TVA does not find a PCA on network or Ethernet cable is not connected to the TVA, the TV will display “No PCA”.
When the TVA finds one or more PCA in the network, it will show all the PCA on the TV.
When there is more than one PCA on the network, the push button called “source” on the TVA allows the proper PCA to be selected.
When the source button is pushed and you select a PCA to be connected, the TVA will automatically connect to that PCA after three seconds. The TV will show “Connecting to…”.
After the PCA and TVA connection is established, the TVA will display the PC screen that is connected to that PCA.
Run Time OSD
When the source button is pushed in run time (a TVA is connected to a PCA), the TVA shows below menu.
OSD |
Description |
PCA … |
List all discovered PCA. “Connected” means that PCA is connected to the TVA. |
REFRESH |
Using VGA mode, sometime the graphic is not fixed in the TV screen. At that time, you can use “REFRESH” to automatically adjust the graphic into the TV screen. |
LOCK PCA |
Lock the connected PCA. |
PCA SETTING |
Setup the connected PCA |
TVA OFF |
Turn off the TVA |
EXIT |
Exit the menu |
Push the source button to jump to the menu which user wants to select and after four seconds, it will enter in the menu. Select PCA setting will enter into below menu.
OSD |
Description |
Multi/One TVA |
Change the PCA transmitting method. Multi TVA mode: the PCA transmits audio/video in multicast packets. One TVA mode: the PCA transmits audio/video in unicast packets |
Bandwidth |
Users can change high, medium or low bandwidth to transfer audio/video. |
Info |
It will show the PCA and TVA information. |
Exit |
Exit the PCA setting menu. |
TVA Setup OSD
The push button is pressed before a TVA is connected to a PCA.
OSD |
Description |
Refresh |
|
TVA setting |
Setup the TVA. It includes Audio and IR input setting. |
TVA off |
Turn off the TVA. |
When you enter TVA setting, you can setup audio and IR inputs.
OSD |
Description |
Audio input |
You can enable or disable audio input in this item. |
IR input |
IR input is enabled or disabled in this item. |
Return |
Return to above menu. |
Audio Input Setting
OSD |
Description |
MIC in disable |
Disable MIC input reduces bandwidth utilization from the TVA to a PCA. |
MIC in enable |
You can turn on MIC input using this. |
Return |
Return to above menu. |
IR Input Setting
OSD |
Description |
IR disable |
Turns off IR receiver |
Internal IR |
Enable internal IR receiver by using this item. |
Return |
Return to above menu. |
